
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/04/11,13:36:31 --- Time Set (yr/mon/day,hour:min:sec)
>TS11/04/11, 13:36:36
>CR1
[Parameters set to FACTORY defaults]
>WD 111 000 000
>TE00:00:00.00
>CF11110
>EX00000
>EZ1011101
>EA04500
>WP1
>WN32
>WS400
>WF400
>BP0
>BX2000
>WB0
>WV550
>TP00:00.80
>B?
BP = 000 ----------------- Pings per Ensemble
>W?
WD = 111 000 000 --------- Data Out (Vel;Cor;Amp  PG;St;P0  P1;P2;P3)
WF = 0400 ---------------- Blank After Transmit (cm)
WN = 032 ----------------- Number of depth cells (1-255)
WP = 00001 --------------- Pings per Ensemble (0-16384)
WS = 0400 ---------------- Depth Cell Size (cm)
WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial)
>E?
EA = +04500 -------------- Heading Alignment (1/100 deg)
EB = +00000 -------------- Heading Bias (1/100 deg)
ED = 00000 --------------- Transducer Depth (0 - 65535 dm)
ES = 35 ------------------ Salinity (0-40 pp thousand)
EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map)
EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T)
>C?
CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop)
CC = 000 000 000 --------- Choose External Devices (x;x;x  x;x;x  x;x;SBMC)
CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CP = 0 ------------------- PolledMode (1=ON, 0=OFF;  BREAK resets)
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Go (Start Pinging)
CZ ----------------------- Power Down Instrument
>T?
TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100)
TS = 11/04/11,13:36:39 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2011/04/11,13:36:39 - Time Set (CCYY/MM/DD,hh:mm:ss)
>PS0
  Instrument S/N:  0
       Frequency:  307200 HZ
   Configuration:  4 BEAM, JANUS
     Match Layer:  10
      Beam Angle:  20 DEGREES
    Beam Pattern:  CONVEX 
     Orientation:  DOWN
       Sensor(s):  HEADING  TILT 1  TILT 2  TEMPERATURE
Temp Sens Offset:  -0.28 degrees C

    CPU Firmware:  16.28 [0]
   Boot Code Ver:  Required:  1.13   Actual:  1.13
    DEMOD #1 Ver:  ad48, Type:  1f
    DEMOD #2 Ver:  ad48, Type:  1f
    PWRTIMG  Ver:  85d3, Type:   7

Board Serial Number Data:
   7A  00 00 00 86 80 62  09 PIO727-3000-00C
   B1  00 00 00 7E 69 3A  09 CPU727-2000-00J
   1D  00 00 00 86 BE B5  09 DSP727-2001-04G
   29  00 00 00 86 8D 8B  09 REC727-1000-04E
>CF11110
>
>CB611
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/04/11,13:46:48 --- Time Set (yr/mon/day,hour:min:sec)
>
Powering Down

[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/04/11,16:34:48 --- Time Set (yr/mon/day,hour:min:sec)
>TS11/04/11, 16:34:48
>CR1
[Parameters set to FACTORY defaults]
>WD 111 000 000
>TE00:00:00.00
>CF11110
>EX00000
>EZ1011101
>EA04500
>WP1
>WN32
>WS400
>WF400
>BP0
>BX2000
>WB0
>WV550
>TP00:00.80
>B?
BP = 000 ----------------- Pings per Ensemble
>W?
WD = 111 000 000 --------- Data Out (Vel;Cor;Amp  PG;St;P0  P1;P2;P3)
WF = 0400 ---------------- Blank After Transmit (cm)
WN = 032 ----------------- Number of depth cells (1-255)
WP = 00001 --------------- Pings per Ensemble (0-16384)
WS = 0400 ---------------- Depth Cell Size (cm)
WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial)
>E?
EA = +04500 -------------- Heading Alignment (1/100 deg)
EB = +00000 -------------- Heading Bias (1/100 deg)
ED = 00000 --------------- Transducer Depth (0 - 65535 dm)
ES = 35 ------------------ Salinity (0-40 pp thousand)
EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map)
EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T)
>C?
CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop)
CC = 000 000 000 --------- Choose External Devices (x;x;x  x;x;x  x;x;SBMC)
CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CP = 0 ------------------- PolledMode (1=ON, 0=OFF;  BREAK resets)
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Go (Start Pinging)
CZ ----------------------- Power Down Instrument
>T?
TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100)
TS = 11/04/11,16:34:51 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2011/04/11,16:34:51 - Time Set (CCYY/MM/DD,hh:mm:ss)
>PS0
  Instrument S/N:  0
       Frequency:  307200 HZ
   Configuration:  4 BEAM, JANUS
     Match Layer:  10
      Beam Angle:  20 DEGREES
    Beam Pattern:  CONVEX 
     Orientation:  DOWN
       Sensor(s):  HEADING  TILT 1  TILT 2  TEMPERATURE
Temp Sens Offset:  -0.28 degrees C

    CPU Firmware:  16.28 [0]
   Boot Code Ver:  Required:  1.13   Actual:  1.13
    DEMOD #1 Ver:  ad48, Type:  1f
    DEMOD #2 Ver:  ad48, Type:  1f
    PWRTIMG  Ver:  85d3, Type:   7

Board Serial Number Data:
   7A  00 00 00 86 80 62  09 PIO727-3000-00C
   B1  00 00 00 7E 69 3A  09 CPU727-2000-00J
   1D  00 00 00 86 BE B5  09 DSP727-2001-04G
   29  00 00 00 86 8D 8B  09 REC727-1000-04E
>CF11110
>
>CB611
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/04/15,05:33:54 --- Time Set (yr/mon/day,hour:min:sec)
>
Powering Down

[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/04/15,05:55:45 --- Time Set (yr/mon/day,hour:min:sec)
>TS11/04/15, 05:55:46
>CR1
[Parameters set to FACTORY defaults]
>WD 111 000 000
>TE00:00:00.00
>CF11110
>EX00000
>EZ1011101
>EA04500
>WP1
>WN32
>WS400
>WF400
>BP0
>BX2000
>WB0
>WV550
>TP00:00.80
>B?
BP = 000 ----------------- Pings per Ensemble
>W?
WD = 111 000 000 --------- Data Out (Vel;Cor;Amp  PG;St;P0  P1;P2;P3)
WF = 0400 ---------------- Blank After Transmit (cm)
WN = 032 ----------------- Number of depth cells (1-255)
WP = 00001 --------------- Pings per Ensemble (0-16384)
WS = 0400 ---------------- Depth Cell Size (cm)
WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial)
>E?
EA = +04500 -------------- Heading Alignment (1/100 deg)
EB = +00000 -------------- Heading Bias (1/100 deg)
ED = 00000 --------------- Transducer Depth (0 - 65535 dm)
ES = 35 ------------------ Salinity (0-40 pp thousand)
EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map)
EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T)
>C?
CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop)
CC = 000 000 000 --------- Choose External Devices (x;x;x  x;x;x  x;x;SBMC)
CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CP = 0 ------------------- PolledMode (1=ON, 0=OFF;  BREAK resets)
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Go (Start Pinging)
CZ ----------------------- Power Down Instrument
>T?
TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100)
TS = 11/04/15,05:55:49 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2011/04/15,05:55:49 - Time Set (CCYY/MM/DD,hh:mm:ss)
>PS0
  Instrument S/N:  0
       Frequency:  307200 HZ
   Configuration:  4 BEAM, JANUS
     Match Layer:  10
      Beam Angle:  20 DEGREES
    Beam Pattern:  CONVEX 
     Orientation:  DOWN
       Sensor(s):  HEADING  TILT 1  TILT 2  TEMPERATURE
Temp Sens Offset:  -0.28 degrees C

    CPU Firmware:  16.28 [0]
   Boot Code Ver:  Required:  1.13   Actual:  1.13
    DEMOD #1 Ver:  ad48, Type:  1f
    DEMOD #2 Ver:  ad48, Type:  1f
    PWRTIMG  Ver:  85d3, Type:   7

Board Serial Number Data:
   7A  00 00 00 86 80 62  09 PIO727-3000-00C
   B1  00 00 00 7E 69 3A  09 CPU727-2000-00J
   1D  00 00 00 86 BE B5  09 DSP727-2001-04G
   29  00 00 00 86 8D 8B  09 REC727-1000-04E
>CF11110
>
>CB611
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/04/15,05:56:15 --- Time Set (yr/mon/day,hour:min:sec)
>
Powering Down

[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/04/29,17:55:00 --- Time Set (yr/mon/day,hour:min:sec)
>TS11/04/29, 17:55:02
>CR1
[Parameters set to FACTORY defaults]
>WD 111 000 000
>TE00:00:00.00
>CF11110
>EX00000
>EZ1011101
>EA04500
>WP1
>WN32
>WS400
>WF400
>BP0
>BX2000
>WB0
>WV550
>TP00:00.80
>B?
BP = 000 ----------------- Pings per Ensemble
>W?
WD = 111 000 000 --------- Data Out (Vel;Cor;Amp  PG;St;P0  P1;P2;P3)
WF = 0400 ---------------- Blank After Transmit (cm)
WN = 032 ----------------- Number of depth cells (1-255)
WP = 00001 --------------- Pings per Ensemble (0-16384)
WS = 0400 ---------------- Depth Cell Size (cm)
WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial)
>E?
EA = +04500 -------------- Heading Alignment (1/100 deg)
EB = +00000 -------------- Heading Bias (1/100 deg)
ED = 00000 --------------- Transducer Depth (0 - 65535 dm)
ES = 35 ------------------ Salinity (0-40 pp thousand)
EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map)
EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T)
>C?
CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop)
CC = 000 000 000 --------- Choose External Devices (x;x;x  x;x;x  x;x;SBMC)
CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CP = 0 ------------------- PolledMode (1=ON, 0=OFF;  BREAK resets)
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Go (Start Pinging)
CZ ----------------------- Power Down Instrument
>T?
TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100)
TS = 11/04/29,17:55:05 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2011/04/29,17:55:05 - Time Set (CCYY/MM/DD,hh:mm:ss)
>PS0
  Instrument S/N:  0
       Frequency:  307200 HZ
   Configuration:  4 BEAM, JANUS
     Match Layer:  10
      Beam Angle:  20 DEGREES
    Beam Pattern:  CONVEX 
     Orientation:  DOWN
       Sensor(s):  HEADING  TILT 1  TILT 2  TEMPERATURE
Temp Sens Offset:  -0.28 degrees C

    CPU Firmware:  16.28 [0]
   Boot Code Ver:  Required:  1.13   Actual:  1.13
    DEMOD #1 Ver:  ad48, Type:  1f
    DEMOD #2 Ver:  ad48, Type:  1f
    PWRTIMG  Ver:  85d3, Type:   7

Board Serial Number Data:
   7A  00 00 00 86 80 62  09 PIO727-3000-00C
   B1  00 00 00 7E 69 3A  09 CPU727-2000-00J
   1D  00 00 00 86 BE B5  09 DSP727-2001-04G
   29  00 00 00 86 8D 8B  09 REC727-1000-04E
>CF11110
>
>CB611
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.

[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/04/30,00:06:31 --- Time Set (yr/mon/day,hour:min:sec)
>
Powering Down

[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/04/30,18:00:50 --- Time Set (yr/mon/day,hour:min:sec)
>TS11/04/30, 18:00:50
>CR1
[Parameters set to FACTORY defaults]
>WD 111 000 000
>TE00:00:00.00
>CF11110
>EX00000
>EZ1011101
>EA04500
>WP1
>WN32
>WS400
>WF400
>BP0
>BX2000
>WB0
>WV550
>TP00:00.80
>B?
BP = 000 ----------------- Pings per Ensemble
>W?
WD = 111 000 000 --------- Data Out (Vel;Cor;Amp  PG;St;P0  P1;P2;P3)
WF = 0400 ---------------- Blank After Transmit (cm)
WN = 032 ----------------- Number of depth cells (1-255)
WP = 00001 --------------- Pings per Ensemble (0-16384)
WS = 0400 ---------------- Depth Cell Size (cm)
WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial)
>E?
EA = +04500 -------------- Heading Alignment (1/100 deg)
EB = +00000 -------------- Heading Bias (1/100 deg)
ED = 00000 --------------- Transducer Depth (0 - 65535 dm)
ES = 35 ------------------ Salinity (0-40 pp thousand)
EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map)
EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T)
>C?
CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop)
CC = 000 000 000 --------- Choose External Devices (x;x;x  x;x;x  x;x;SBMC)
CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CP = 0 ------------------- PolledMode (1=ON, 0=OFF;  BREAK resets)
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Go (Start Pinging)
CZ ----------------------- Power Down Instrument
>T?
TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100)
TS = 11/04/30,18:00:53 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2011/04/30,18:00:53 - Time Set (CCYY/MM/DD,hh:mm:ss)
>PS0
  Instrument S/N:  0
       Frequency:  307200 HZ
   Configuration:  4 BEAM, JANUS
     Match Layer:  10
      Beam Angle:  20 DEGREES
    Beam Pattern:  CONVEX 
     Orientation:  DOWN
       Sensor(s):  HEADING  TILT 1  TILT 2  TEMPERATURE
Temp Sens Offset:  -0.28 degrees C

    CPU Firmware:  16.28 [0]
   Boot Code Ver:  Required:  1.13   Actual:  1.13
    DEMOD #1 Ver:  ad48, Type:  1f
    DEMOD #2 Ver:  ad48, Type:  1f
    PWRTIMG  Ver:  85d3, Type:   7

Board Serial Number Data:
   7A  00 00 00 86 80 62  09 PIO727-3000-00C
   B1  00 00 00 7E 69 3A  09 CPU727-2000-00J
   1D  00 00 00 86 BE B5  09 DSP727-2001-04G
   29  00 00 00 86 8D 8B  09 REC727-1000-04E
>CF11110
>
>CB611
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/05/02,14:54:29 --- Time Set (yr/mon/day,hour:min:sec)
>
Powering Down

[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/05/02,16:51:43 --- Time Set (yr/mon/day,hour:min:sec)
>TS11/05/02, 16:51:44
>CR1
[Parameters set to FACTORY defaults]
>WD 111 000 000
>TE00:00:00.00
>CF11110
>EX00000
>EZ1011101
>EA04500
>WP1
>WN80
>WS400
>WF400
>BP0
>BX2000
>WB0
>WV550
>TP00:00.80
>B?
BP = 000 ----------------- Pings per Ensemble
>W?
WD = 111 000 000 --------- Data Out (Vel;Cor;Amp  PG;St;P0  P1;P2;P3)
WF = 0400 ---------------- Blank After Transmit (cm)
WN = 080 ----------------- Number of depth cells (1-255)
WP = 00001 --------------- Pings per Ensemble (0-16384)
WS = 0400 ---------------- Depth Cell Size (cm)
WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial)
>E?
EA = +04500 -------------- Heading Alignment (1/100 deg)
EB = +00000 -------------- Heading Bias (1/100 deg)
ED = 00000 --------------- Transducer Depth (0 - 65535 dm)
ES = 35 ------------------ Salinity (0-40 pp thousand)
EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map)
EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T)
>C?
CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop)
CC = 000 000 000 --------- Choose External Devices (x;x;x  x;x;x  x;x;SBMC)
CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CP = 0 ------------------- PolledMode (1=ON, 0=OFF;  BREAK resets)
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Go (Start Pinging)
CZ ----------------------- Power Down Instrument
>T?
TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100)
TS = 11/05/02,16:51:47 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2011/05/02,16:51:47 - Time Set (CCYY/MM/DD,hh:mm:ss)
>PS0
  Instrument S/N:  0
       Frequency:  307200 HZ
   Configuration:  4 BEAM, JANUS
     Match Layer:  10
      Beam Angle:  20 DEGREES
    Beam Pattern:  CONVEX 
     Orientation:  DOWN
       Sensor(s):  HEADING  TILT 1  TILT 2  TEMPERATURE
Temp Sens Offset:  -0.28 degrees C

    CPU Firmware:  16.28 [0]
   Boot Code Ver:  Required:  1.13   Actual:  1.13
    DEMOD #1 Ver:  ad48, Type:  1f
    DEMOD #2 Ver:  ad48, Type:  1f
    PWRTIMG  Ver:  85d3, Type:   7

Board Serial Number Data:
   7A  00 00 00 86 80 62  09 PIO727-3000-00C
   B1  00 00 00 7E 69 3A  09 CPU727-2000-00J
   1D  00 00 00 86 BE B5  09 DSP727-2001-04G
   29  00 00 00 86 8D 8B  09 REC727-1000-04E
>CF11110
>
>CB611
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/05/03,21:48:23 --- Time Set (yr/mon/day,hour:min:sec)
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/05/03,21:49:06 --- Time Set (yr/mon/day,hour:min:sec)
>TS11/05/03, 21:49:07
>CR1
[Parameters set to FACTORY defaults]
>WD 111 000 000
>TE00:00:00.00
>CF11110
>EX00000
>EZ1011101
>EA04500
>WP1
>WN80
>WS400
>WF400
>BP0
>BX2000
>WB0
>WV550
>TP00:00.80
>B?
BP = 000 ----------------- Pings per Ensemble
>W?
WD = 111 000 000 --------- Data Out (Vel;Cor;Amp  PG;St;P0  P1;P2;P3)
WF = 0400 ---------------- Blank After Transmit (cm)
WN = 080 ----------------- Number of depth cells (1-255)
WP = 00001 --------------- Pings per Ensemble (0-16384)
WS = 0400 ---------------- Depth Cell Size (cm)
WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial)
>E?
EA = +04500 -------------- Heading Alignment (1/100 deg)
EB = +00000 -------------- Heading Bias (1/100 deg)
ED = 00000 --------------- Transducer Depth (0 - 65535 dm)
ES = 35 ------------------ Salinity (0-40 pp thousand)
EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map)
EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T)
>C?
CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop)
CC = 000 000 000 --------- Choose External Devices (x;x;x  x;x;x  x;x;SBMC)
CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CP = 0 ------------------- PolledMode (1=ON, 0=OFF;  BREAK resets)
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Go (Start Pinging)
CZ ----------------------- Power Down Instrument
>T?
TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100)
TS = 11/05/03,21:49:10 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2011/05/03,21:49:10 - Time Set (CCYY/MM/DD,hh:mm:ss)
>PS0
  Instrument S/N:  0
       Frequency:  307200 HZ
   Configuration:  4 BEAM, JANUS
     Match Layer:  10
      Beam Angle:  20 DEGREES
    Beam Pattern:  CONVEX 
     Orientation:  DOWN
       Sensor(s):  HEADING  TILT 1  TILT 2  TEMPERATURE
Temp Sens Offset:  -0.28 degrees C

    CPU Firmware:  16.28 [0]
   Boot Code Ver:  Required:  1.13   Actual:  1.13
    DEMOD #1 Ver:  ad48, Type:  1f
    DEMOD #2 Ver:  ad48, Type:  1f
    PWRTIMG  Ver:  85d3, Type:   7

Board Serial Number Data:
   7A  00 00 00 86 80 62  09 PIO727-3000-00C
   B1  00 00 00 7E 69 3A  09 CPU727-2000-00J
   1D  00 00 00 86 BE B5  09 DSP727-2001-04G
   29  00 00 00 86 8D 8B  09 REC727-1000-04E
>CF11110
>
>CB611
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/05/03,23:09:35 --- Time Set (yr/mon/day,hour:min:sec)
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/05/03,23:09:44 --- Time Set (yr/mon/day,hour:min:sec)
>TS11/05/03, 23:09:45
>CR1
[Parameters set to FACTORY defaults]
>WD 111 000 000
>TE00:00:00.00
>CF11110
>EX00000
>EZ1011101
>EA04500
>WP1
>WN80
>WS400
>WF400
>BP0
>BX2000
>WB0
>WV550
>TP00:00.80
>B?
BP = 000 ----------------- Pings per Ensemble
>W?
WD = 111 000 000 --------- Data Out (Vel;Cor;Amp  PG;St;P0  P1;P2;P3)
WF = 0400 ---------------- Blank After Transmit (cm)
WN = 080 ----------------- Number of depth cells (1-255)
WP = 00001 --------------- Pings per Ensemble (0-16384)
WS = 0400 ---------------- Depth Cell Size (cm)
WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial)
>E?
EA = +04500 -------------- Heading Alignment (1/100 deg)
EB = +00000 -------------- Heading Bias (1/100 deg)
ED = 00000 --------------- Transducer Depth (0 - 65535 dm)
ES = 35 ------------------ Salinity (0-40 pp thousand)
EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map)
EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T)
>C?
CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop)
CC = 000 000 000 --------- Choose External Devices (x;x;x  x;x;x  x;x;SBMC)
CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CP = 0 ------------------- PolledMode (1=ON, 0=OFF;  BREAK resets)
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Go (Start Pinging)
CZ ----------------------- Power Down Instrument
>T?
TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100)
TS = 11/05/03,23:09:48 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2011/05/03,23:09:48 - Time Set (CCYY/MM/DD,hh:mm:ss)
>PS0
  Instrument S/N:  0
       Frequency:  307200 HZ
   Configuration:  4 BEAM, JANUS
     Match Layer:  10
      Beam Angle:  20 DEGREES
    Beam Pattern:  CONVEX 
     Orientation:  DOWN
       Sensor(s):  HEADING  TILT 1  TILT 2  TEMPERATURE
Temp Sens Offset:  -0.28 degrees C

    CPU Firmware:  16.28 [0]
   Boot Code Ver:  Required:  1.13   Actual:  1.13
    DEMOD #1 Ver:  ad48, Type:  1f
    DEMOD #2 Ver:  ad48, Type:  1f
    PWRTIMG  Ver:  85d3, Type:   7

Board Serial Number Data:
   7A  00 00 00 86 80 62  09 PIO727-3000-00C
   B1  00 00 00 7E 69 3A  09 CPU727-2000-00J
   1D  00 00 00 86 BE B5  09 DSP727-2001-04G
   29  00 00 00 86 8D 8B  09 REC727-1000-04E
>CF11110
>
>CB611
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/05/06,22:48:34 --- Time Set (yr/mon/day,hour:min:sec)
>
Powering Down

[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/05/12,18:19:39 --- Time Set (yr/mon/day,hour:min:sec)
>TS11/05/12, 18:19:39
>CR1
[Parameters set to FACTORY defaults]
>WD 111 000 000
>TE00:00:00.00
>CF11110
>EX00000
>EZ1011101
>EA04500
>WP1
>WN80
>WS400
>WF400
>BP0
>BX2000
>WB0
>WV550
>TP00:00.80
>B?
BP = 000 ----------------- Pings per Ensemble
>W?
WD = 111 000 000 --------- Data Out (Vel;Cor;Amp  PG;St;P0  P1;P2;P3)
WF = 0400 ---------------- Blank After Transmit (cm)
WN = 080 ----------------- Number of depth cells (1-255)
WP = 00001 --------------- Pings per Ensemble (0-16384)
WS = 0400 ---------------- Depth Cell Size (cm)
WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial)
>E?
EA = +04500 -------------- Heading Alignment (1/100 deg)
EB = +00000 -------------- Heading Bias (1/100 deg)
ED = 00000 --------------- Transducer Depth (0 - 65535 dm)
ES = 35 ------------------ Salinity (0-40 pp thousand)
EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map)
EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T)
>C?
CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop)
CC = 000 000 000 --------- Choose External Devices (x;x;x  x;x;x  x;x;SBMC)
CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CP = 0 ------------------- PolledMode (1=ON, 0=OFF;  BREAK resets)
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Go (Start Pinging)
CZ ----------------------- Power Down Instrument
>T?
TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100)
TS = 11/05/12,18:19:42 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2011/05/12,18:19:42 - Time Set (CCYY/MM/DD,hh:mm:ss)
>PS0
  Instrument S/N:  0
       Frequency:  307200 HZ
   Configuration:  4 BEAM, JANUS
     Match Layer:  10
      Beam Angle:  20 DEGREES
    Beam Pattern:  CONVEX 
     Orientation:  DOWN
       Sensor(s):  HEADING  TILT 1  TILT 2  TEMPERATURE
Temp Sens Offset:  -0.28 degrees C

    CPU Firmware:  16.28 [0]
   Boot Code Ver:  Required:  1.13   Actual:  1.13
    DEMOD #1 Ver:  ad48, Type:  1f
    DEMOD #2 Ver:  ad48, Type:  1f
    PWRTIMG  Ver:  85d3, Type:   7

Board Serial Number Data:
   7A  00 00 00 86 80 62  09 PIO727-3000-00C
   B1  00 00 00 7E 69 3A  09 CPU727-2000-00J
   1D  00 00 00 86 BE B5  09 DSP727-2001-04G
   29  00 00 00 86 8D 8B  09 REC727-1000-04E
>CF11110
>
>CB611
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.

[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/05/13,12:20:53 --- Time Set (yr/mon/day,hour:min:sec)
>
Powering Down

[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/05/19,17:42:03 --- Time Set (yr/mon/day,hour:min:sec)
>TS11/05/19, 17:42:04
>CR1
[Parameters set to FACTORY defaults]
>WD 111 000 000
>TE00:00:00.00
>CF11110
>EX00000
>EZ1011101
>EA04500
>WP1
>WN80
>WS400
>WF400
>BP0
>BX2000
>WB0
>WV550
>TP00:00.80
>B?
BP = 000 ----------------- Pings per Ensemble
>W?
WD = 111 000 000 --------- Data Out (Vel;Cor;Amp  PG;St;P0  P1;P2;P3)
WF = 0400 ---------------- Blank After Transmit (cm)
WN = 080 ----------------- Number of depth cells (1-255)
WP = 00001 --------------- Pings per Ensemble (0-16384)
WS = 0400 ---------------- Depth Cell Size (cm)
WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial)
WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial)
>E?
EA = +04500 -------------- Heading Alignment (1/100 deg)
EB = +00000 -------------- Heading Bias (1/100 deg)
ED = 00000 --------------- Transducer Depth (0 - 65535 dm)
ES = 35 ------------------ Salinity (0-40 pp thousand)
EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map)
EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T)
>C?
CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop)
CC = 000 000 000 --------- Choose External Devices (x;x;x  x;x;x  x;x;SBMC)
CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CP = 0 ------------------- PolledMode (1=ON, 0=OFF;  BREAK resets)
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Go (Start Pinging)
CZ ----------------------- Power Down Instrument
>T?
TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec)
TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss)
TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100)
TS = 11/05/19,17:42:07 --- Time Set (yr/mon/day,hour:min:sec)
TT = 2011/05/19,17:42:07 - Time Set (CCYY/MM/DD,hh:mm:ss)
>PS0
  Instrument S/N:  0
       Frequency:  307200 HZ
   Configuration:  4 BEAM, JANUS
     Match Layer:  10
      Beam Angle:  20 DEGREES
    Beam Pattern:  CONVEX 
     Orientation:  DOWN
       Sensor(s):  HEADING  TILT 1  TILT 2  TEMPERATURE
Temp Sens Offset:  -0.28 degrees C

    CPU Firmware:  16.28 [0]
   Boot Code Ver:  Required:  1.13   Actual:  1.13
    DEMOD #1 Ver:  ad48, Type:  1f
    DEMOD #2 Ver:  ad48, Type:  1f
    PWRTIMG  Ver:  85d3, Type:   7

Board Serial Number Data:
   7A  00 00 00 86 80 62  09 PIO727-3000-00C
   B1  00 00 00 7E 69 3A  09 CPU727-2000-00J
   1D  00 00 00 86 BE B5  09 DSP727-2001-04G
   29  00 00 00 86 8D 8B  09 REC727-1000-04E
>CF11110
>
>CB611
>
[BREAK Wakeup B]
WorkHorse Broadband ADCP Version 16.28
RD Instruments (c) 1996-2005
All Rights Reserved.
The fault log has been disabled.
Use the FC command to clear the fault log.
>TS?
TS = 11/05/20,01:49:17 --- Time Set (yr/mon/day,hour:min:sec)
>
Powering Down
