CTD SYSTEM CONFIGURATION
         			Cruise:	EN361	Dates:	1  16 October 2001
Tech: Lynne Butler					Chief Scientists:	Rob Olson, WHOI

Program, version						SeaSave Win32 v 1.19, DOS Seasoft 4.244
File names						CTD001  010.* , EN361.cfg, Depth*.dso

Batch files used	seasoft\arc361.bat to archive, seasoft\pro361*.bat to process

SBE 9plus CTD underwater unit (6800m depth capability)	S/N	12293-0444, 16940-0523, 23539-0607, none

SBE 25 Sealogger					S/N	252406-4, none
SBE 29 Pressure sensor					S/N	103, 104, 105, none

SBE 11plus deck unit					S/N	11P12293-  0426, 0427, none

Temperature sensor, primary (3400 m, 6800m, slow, fast)	S/N	596, 604, 753, 972, 1164, 1185
(SBE 3, 3Plus)				1578, 1678, 2034, 2107, 2899, 2902

Temperature sensor, secondary (3400 m, 6800m, slow, fast)	S/N	596, 604, 753, 972, 1164, 1185
         (SBE 3, 3Plus)				1578, 1678, 2034, 2107, 2899, 2902, none

Conductivity sensor, primary (SBE 4C, 3400m, 6800m)	S/N	199, 200, 618, 856, 864, 1446
         1578, 1745, 1749, 2459, 2469

Conductivity sensor, secondary (SBE 4C, 3400m, 6800m)	S/N	199, 200, 618, 856, 864, 1446
         1578, 1745, 1749, 2459, 2469, none

Pump, primary	(SBE 5T, 10500m)			S/N	1413, 1595, 1596, 2237, 2238, 2825, 2892

Pump, secondary	(SBE 5T, 10500m)			S/N	1413, 1595, 1596, 2237, 2238, 2825
         2892, none

Oxygen sensor	(SBE 13, SBE 23, 6800m)			S/N	130443, 130454, 230313, none

Fluorometer	(Sea Tech, 3000m)			S/N	30S (CTD001), 117S (CTD002 - 010), none
Fluorometer	(WetLabs, WetStar, xxxxm)		S/N	WS3S-389P, none

Transmissometer (Sea Tech  25 cm, 5000m)		S/N	120D, 243D, none
Transmissometer (WetLabs C-Star  25 cm, 6000m)		S/N	CST-399DR, none

Light sensor PAR, QSP-200L4S (Biospherical, 1000m)	S/N	4479, none
Light sensor, Surface SPAR, QSR-240 (Biospherical)		S/N	6361, none

Data format (factory & user installed sensors)
Frequency 0		temperature, primary		External voltage 3	spare
Frequency 1		conductivity, primary		External voltage 4	irradiance, PAR 4479
Frequency 2		pressure				External voltage 5	spare
Frequency 3		temperature, secondary		External voltage 6	spare
Frequency 4		conductivity, secondary		External voltage 7	spare
External voltage 0	transmissometer 399DR		External voltage 8	spare
External voltage 1	fluorometer 30S or 117S		External voltage 9	surface irradiance, SPAR 6361
External voltage 2	spare

Carousel	 pylon, rosette		GO, SBE		S/N	3210573-0048, 3216020-0175, none
Frame w/ s/s cage							12 pl SBE alum, 12 pl s/s, 24pl SBE alum, bk1, bk2 
Niskins		# on frame: 12	1.5, 5, 10, 30 L			Go-Flo, Ext resist, Internal resist, none
Winch / wire						#	1, 2, 3 / .322, .680, 3/8, , 9/16
Slip Rings (Meridian)					S/N	6.859, 8.538 (10wire), 8.594 none
Pinger	(Williams)					S/N	W1, W2, W3, none
         (Benthos 2216, 12000m)				S/N	1237, none
         
Note for SBE 9plus CTD underwater unit S/N 12293-0444, 0523 & 0607:
  CTDs 0444, 0523, and 0607 were supplied with an isolated 12-volt power source for a Sea Tech fluorometer in a 3000 meter stainless steel housing. When this fluorometer is used it must be installed on connector JT2 (see drawing 50077). This will put the fluorometer output on A/D channel 1 (External Voltage 1).

Note for SBE 9plus CTD underwater unit S/Ns:
  CTDs 0444, 0523, and 0607 were supplied with an isolated 12-volt power source for a Sea Tech fluorometer in a 3000 meter stainless steel housing. When this fluorometer is used it must be installed on connector JT2 (see drawing 50077). This will put the fluorometer output on A/D channel 1 (External Voltage 1).

Underwater unit S/N 9P16940-0607, as of 2000:
Pressure sensor range						0-10,000 psia, 0-6885 d-Bar
pressure sensor, Digiquartz (with temp comp, SBE)		S/N	80016

Modulo							S/N	MOD12P-439
AD590M (enter in Seacon)					0.01284522
AD590B (enter in Seacon)						-8.669589

A/D Input Voltage Range						0 to 5 volts DC

Logic Board EPROM				Version 1.0
Modem Interface NOT installed
NO Modem Board Microcontroller			Version 2.0A, Version 1.1		P/N N/A, 11124, 11194
Isolated Fluorometer Power Interface NOT Installed

		cd:\EN361\CTD\ctdsyscon361.doc

