Current direction, wind wave spectra, phytoplankton, zooplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1977-09-24 to 1981-08-31 (NCEI Accession 8100681)
Current direction, chemical, phytoplankton, zooplankton, wind wave spectra, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from August 30, 1979 to August 1, 1981. Data were submitted by Texas A&M University as part of the Brine Disposal project. Data has been processed by NODC to the NODC standard F005- Current Meter Data, F028- Phytoplankton, F069- Marine Chemistry, F124- Zooplankton, and F191- Wind Wave Spectra formats.
The F005 format is used for time series measurements of ocean currents obtained using moored current-measuring instruments, principally Aanderaa current meters (manufactured by Aanderaa Instruments Inc.). These data represent the Eulerian method of current measurement, i.e., the meters are deployed at a fixed mooring point and measure flow past the sensor. Position, water depth, and sensor depth are reported for each station. The data record comprises values of current direction and speed at specified date and time. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Other environmental parameters may also be reported. These include: water temperature, salinity, conductivity, and transmissivity; wind direction and speed; and dominant wave direction, height, and period. A text field is available for optional comments.
The F028 format is used for data from the sampling and analysis of marine phytoplankton. Information on phytoplankton abundance, distribution, and productivity derived from these data support studies of marine populations and ecosystems. Data reported may include: position, date, and time of sampling; bottom depth and sampling depths; volume of water filtered; and concentration of cells, carbon concentration, wet and dry weight, and counts for each species reported. Comments may be relayed in a text record.
The F069 format is used for data from chemical analyses of seawater samples. Cruise information, position, date, and time is reported for each station along with sample depth, temperature, salinity, and density (sigma-t). Chemical and biochemical parameters that may be reported include: dissolved oxygen, nitrate, nitrite, ammonia, inorganic phosphate, and silicate; dissolved organic carbon, particulate organic carbon, and particulate organic nitrogen; and apparent oxygen utilization, percent oxygen saturation, adenosine triphosphate, total phaeophytin, total chlorophyll, total suspended matter, total recoverable petroleum hydrocarbons, and total resolved light hydrocarbons.
The F124 format is used for data from sampling and analysis of marine zooplankton. Information on zooplankton abundance, distribution, and productivity derived from these data support studies of marine populations and ecosystems. Data reported may include: cruise information, position, date, and time of sampling; bottom depth, sampling depths, temperature, and salinity; gear type, volume of water filtered, total dry and wet weight, and other data for total haul; and data for subsamples by species. Data on zooplankton catch by species may include subsample size, zooplankton concentration, life history code, and numbers of adults, juveniles, eggs, and larvae. Estimated density of holoplankton and meroplankton and data on ichthyoplankton may also be reported. A text record is available for comments. Note: there are two options for reporting subsample counts of individuals at different life history stages. If life history codes are used, only number of adults should be reported on that record. Additional separate records should then be used to report number of juveniles and so on. Alternatively, life history codes may not be used and number of adults, juveniles, and so entered in the proper fields of a single record.
The F191 format is used to report meteorological data and ocean wave spectra data from NDBC. The format contains seven data record types to: 1) Identify the buoy for position, duration, rate of sampling and heading. 2) Identify the meteorological parameters (temperature, pressure, weather, solar radiation, and surface waves). 3) Report time series frequency, density and resolution of waves. Each record is 120 characters in length, sorted by station and record type. The first nine columns for all records are to be used for file type (columns 1-3) and file identifier (column 4-9). The file identifier, to be assigned by the originator, is a unique originator id for each data submission. After submission, the NODC reassigns to this field a unique NODC identifier for internal use.
The F005 format is used for time series measurements of ocean currents obtained using moored current-measuring instruments, principally Aanderaa current meters (manufactured by Aanderaa Instruments Inc.). These data represent the Eulerian method of current measurement, i.e., the meters are deployed at a fixed mooring point and measure flow past the sensor. Position, water depth, and sensor depth are reported for each station. The data record comprises values of current direction and speed at specified date and time. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Other environmental parameters may also be reported. These include: water temperature, salinity, conductivity, and transmissivity; wind direction and speed; and dominant wave direction, height, and period. A text field is available for optional comments.
The F028 format is used for data from the sampling and analysis of marine phytoplankton. Information on phytoplankton abundance, distribution, and productivity derived from these data support studies of marine populations and ecosystems. Data reported may include: position, date, and time of sampling; bottom depth and sampling depths; volume of water filtered; and concentration of cells, carbon concentration, wet and dry weight, and counts for each species reported. Comments may be relayed in a text record.
The F069 format is used for data from chemical analyses of seawater samples. Cruise information, position, date, and time is reported for each station along with sample depth, temperature, salinity, and density (sigma-t). Chemical and biochemical parameters that may be reported include: dissolved oxygen, nitrate, nitrite, ammonia, inorganic phosphate, and silicate; dissolved organic carbon, particulate organic carbon, and particulate organic nitrogen; and apparent oxygen utilization, percent oxygen saturation, adenosine triphosphate, total phaeophytin, total chlorophyll, total suspended matter, total recoverable petroleum hydrocarbons, and total resolved light hydrocarbons.
The F124 format is used for data from sampling and analysis of marine zooplankton. Information on zooplankton abundance, distribution, and productivity derived from these data support studies of marine populations and ecosystems. Data reported may include: cruise information, position, date, and time of sampling; bottom depth, sampling depths, temperature, and salinity; gear type, volume of water filtered, total dry and wet weight, and other data for total haul; and data for subsamples by species. Data on zooplankton catch by species may include subsample size, zooplankton concentration, life history code, and numbers of adults, juveniles, eggs, and larvae. Estimated density of holoplankton and meroplankton and data on ichthyoplankton may also be reported. A text record is available for comments. Note: there are two options for reporting subsample counts of individuals at different life history stages. If life history codes are used, only number of adults should be reported on that record. Additional separate records should then be used to report number of juveniles and so on. Alternatively, life history codes may not be used and number of adults, juveniles, and so entered in the proper fields of a single record.
The F191 format is used to report meteorological data and ocean wave spectra data from NDBC. The format contains seven data record types to: 1) Identify the buoy for position, duration, rate of sampling and heading. 2) Identify the meteorological parameters (temperature, pressure, weather, solar radiation, and surface waves). 3) Report time series frequency, density and resolution of waves. Each record is 120 characters in length, sorted by station and record type. The first nine columns for all records are to be used for file type (columns 1-3) and file identifier (column 4-9). The file identifier, to be assigned by the originator, is a unique originator id for each data submission. After submission, the NODC reassigns to this field a unique NODC identifier for internal use.
Dataset Citation
- Cite as: Beacht, William L. (2002). Current direction, wind wave spectra, phytoplankton, zooplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1977-09-24 to 1981-08-31 (NCEI Accession 8100681). [indicate subset used]. NOAA National Centers for Environmental Information. Dataset. https://www.ncei.noaa.gov/archive/accession/8100681. Accessed [date].
Dataset Identifiers
ISO 19115-2 Metadata
gov.noaa.nodc:8100681
Download Data |
|
Distribution Formats |
|
Ordering Instructions | Contact NCEI for other distribution options and instructions. |
Distributor |
NOAA National Centers for Environmental Information +1-301-713-3277 NCEI.Info@noaa.gov |
Dataset Point of Contact |
NOAA National Centers for Environmental Information ncei.info@noaa.gov |
Time Period | 1979-08-30 to 1981-08-01 |
Spatial Bounding Box Coordinates |
West: -95.43
East: -93.3
South: 28.69
North: 30.06
|
Spatial Coverage Map |
General Documentation |
|
Associated Resources |
|
Publication Dates |
|
Data Presentation Form | Digital table - digital representation of facts or figures systematically displayed, especially in columns |
Dataset Progress Status | Complete - production of the data has been completed Historical archive - data has been stored in an offline storage facility |
Data Update Frequency | As needed |
Supplemental Information | Note: Metadata for this accession were extracted from a legacy database maintained by the U.S. National Oceanographic Data Center (NODC). The design of the database did not exactly reflect the FGDC Content Standard for Digital Geospatial Metadata (CSDGM). Principal Investigator (PI) and organization contact information accurately represents all available information from the legacy database at the time that this description was created. However, proper attribution of a PI to a specific institution or the role (submitting or collecting) taken by an institution may not be correct due to inexact mapping between fields in the legacy database and the CSDGM. Due to this uncertainty, the contact information was initially recorded in the Supplemental Information element of the CSDGM description. To develop more accurate metadata, NCEI reviews metadata for all accessions on an ongoing basis. Points of contact for this dataset include: Contact info: Agency: TEXAS A&M UNIVERSITY PI: N/A Address: address: NOT AVAILABLE city: COLLEGE STATION state: TX postal: 77843-3146 country: UNITED STATES Contact info: Agency: US DOC; NOAA; NATIONAL DATA BUOY CENTER Address: address: BLDG. 1100 city: STENNIS SPACE CENTER state: MS postal: 39529-6000 country: UNITED STATES Contact info: Agency: MCNEESE STATE UNIVERSITY Address: address: P.O. BOX 92000 city: LAKE CHARLES state: LA postal: 70609-2000 country: UNITED STATES In this accession, NCEI has archived multiple versions of these data. The latest (and best) version of these data has the largest version number. |
Purpose | This dataset is available to the public for a wide variety of uses including scientific research and analysis. |
Use Limitations |
|
Dataset Citation |
|
Cited Authors | |
Principal Investigators | |
Contributors | |
Resource Providers | |
Publishers |
Use Constraints |
|
Access Constraints |
|
Fees |
|
Lineage information for: dataset | |
---|---|
Processing Steps |
|
Output Datasets |
|
Lineage information for: repository | |
---|---|
Processing Steps |
|
Acquisition Information (collection) | |
---|---|
Instrument |
|
Platform |
|
Last Modified: 2024-02-27T13:37:52Z
For questions about the information on this page, please email: ncei.info@noaa.gov
For questions about the information on this page, please email: ncei.info@noaa.gov