Physical and chemical profile data collected from CTD in the R/V Knorr cruise KN200-2 during March 2011 in the North Atlantic Ocean (NCEI Accession 0100287)
The dataset consists of 100 CTD casts in the region north of Flemish Cap. Some casts cover the full water column, while others only cover the upper 1000 db. The CTD casts were obtained with a SeaBird SBE911+ system, measuring temperature (2 sensors), conductivity (2 sensors), pressure, beam transmission, oxygen (plumbed in series with the primary T/C sensor pair), chlorophyll fluorescence, and turbidity. All sensors were sampled at 24 Hz.
The data were processed using the SeaBird data processing software suite, SBEDataProcessing-Win32. A low pass filter, with time constant of 0.15 s, was applied to the pressure record. To account for the transit time between the temperature and conductivity sensors, the conductivity measurements were aligned with the temperature measurements using empirically determined time delays. The primary conductivity was delayed by 0.011 s relative to pressure (this is in addition to the advance of 0.073 s which is performed by the SeaBird deckbox during data acquisition, thus resulting in a net advance of 0.062 s). The secondary conductivity was advanced by 0.050 s.
The oxygen voltage was advanced by 4 s relative to pressure. A correction for conductivity cell thermal mass effects was applied to both conductivity channels using the parameters recommended by SeaBird (alpha=0.03, 1/beta=7.0).
The temperatures, conductivities, and oxygen voltage were then median filtered using a 7-scan window. A loop edit step was then applied, whereby portions of the cast in which the pressure was not changing sufficiently fast (0.2 dbar/s) were removed. This was followed by computation of salinity, potential temperature, potential density, sound velocity, geopotential anomaly, and oxygen concentration. Finally, the data from the downcast were averaged into 1 dbar bins. Further details of the CTD data processing can be found in the header portion of the individual cast files.
The final data files contain raw sensor values (1 dbar bin averages) plus a number of derived variables (e.g., potential temperature, salinity, sigma-theta, oxygen). A full list of the output variables is contained in the header portion of the cast files. The casts were visually examined to determine the quality of the data from the 2 separate sensor suites (primary and secondary). A header line was placed in each file indicating the preferred sensor pair (PRIMARY or SECONDARY) if one was bad or whether both were of equal quality (BOTH GOOD).
The data were processed using the SeaBird data processing software suite, SBEDataProcessing-Win32. A low pass filter, with time constant of 0.15 s, was applied to the pressure record. To account for the transit time between the temperature and conductivity sensors, the conductivity measurements were aligned with the temperature measurements using empirically determined time delays. The primary conductivity was delayed by 0.011 s relative to pressure (this is in addition to the advance of 0.073 s which is performed by the SeaBird deckbox during data acquisition, thus resulting in a net advance of 0.062 s). The secondary conductivity was advanced by 0.050 s.
The oxygen voltage was advanced by 4 s relative to pressure. A correction for conductivity cell thermal mass effects was applied to both conductivity channels using the parameters recommended by SeaBird (alpha=0.03, 1/beta=7.0).
The temperatures, conductivities, and oxygen voltage were then median filtered using a 7-scan window. A loop edit step was then applied, whereby portions of the cast in which the pressure was not changing sufficiently fast (0.2 dbar/s) were removed. This was followed by computation of salinity, potential temperature, potential density, sound velocity, geopotential anomaly, and oxygen concentration. Finally, the data from the downcast were averaged into 1 dbar bins. Further details of the CTD data processing can be found in the header portion of the individual cast files.
The final data files contain raw sensor values (1 dbar bin averages) plus a number of derived variables (e.g., potential temperature, salinity, sigma-theta, oxygen). A full list of the output variables is contained in the header portion of the cast files. The casts were visually examined to determine the quality of the data from the 2 separate sensor suites (primary and secondary). A header line was placed in each file indicating the preferred sensor pair (PRIMARY or SECONDARY) if one was bad or whether both were of equal quality (BOTH GOOD).
Dataset Citation
- Cite as: Ullman, David; University of Rhode Island > Graduate School of Oceanography (2013). Physical and chemical profile data collected from CTD in the R/V Knorr cruise KN200-2 during March 2011 in the North Atlantic Ocean (NCEI Accession 0100287). [indicate subset used]. NOAA National Centers for Environmental Information. Dataset. https://www.ncei.noaa.gov/archive/accession/0100287. Accessed [date].
Dataset Identifiers
ISO 19115-2 Metadata
gov.noaa.nodc:0100287
Download Data |
|
Distribution Formats |
|
Ordering Instructions | Contact NCEI for other distribution options and instructions. |
Distributor |
NOAA National Centers for Environmental Information +1-301-713-3277 NCEI.Info@noaa.gov |
Dataset Point of Contact |
NOAA National Centers for Environmental Information ncei.info@noaa.gov |
Time Period | 2011-03-03 to 2011-03-28 |
Spatial Bounding Box Coordinates |
West: -46.01
East: -39.999
South: 46.999
North: 53.003
|
Spatial Coverage Map |
General Documentation |
|
Publication Dates |
|
Data Presentation Form | Digital table - digital representation of facts or figures systematically displayed, especially in columns |
Dataset Progress Status | Complete - production of the data has been completed Historical archive - data has been stored in an offline storage facility |
Data Update Frequency | As needed |
Purpose | This dataset is available to the public for a wide variety of uses including scientific research and analysis. |
Use Limitations |
|
Dataset Citation |
|
Cited Authors | |
Contributors | |
Resource Providers | |
Publishers |
Use Constraints |
|
Access Constraints |
|
Fees |
|
Lineage information for: dataset | |
---|---|
Processing Steps |
|
Output Datasets |
|
Lineage information for: repository | |
---|---|
Processing Steps |
|
Acquisition Information (collection) | |
---|---|
Instrument |
|
Platform |
|
Last Modified: 2022-07-01T17:45:18Z
For questions about the information on this page, please email: ncei.info@noaa.gov
For questions about the information on this page, please email: ncei.info@noaa.gov